|
Ai Master Board + WiFi Board + 13MP Sony IMX258 Auto Focus OIS Anti-Shake Camera Module Development Kit
|
| Model No. KLT-G1M9WF3+KLT-CMAOIS-IMX258 V1.0 |
Equipped with iCatch V39, built-in 2GB DDR3, supports up to 4K@60FPS (differential), 4K@30FPS, 1080P@120FPS H.264 encoded video. Onboard support Type-C, HDMI, TF memory card, recording, 2 control buttons, buzzer, battery power supply, etc.
This master board extension also supports WiFi, LCD display, CVBS, lens module, UART, I2C, SPI, PWM, MIC and other expansion interfaces. The board size is 38x38mm. Widely used in drones, mini DV, wearable devices, sports cameras, face recognition, USB cameras and other camera products.
| Hardware Specifications |
|
| Model No. |
KLT-G1M9 V6.2 |
| Main Control Chipset (DSP) |
iCatch V39 |
| Image Sensor Interface |
MIPI |
| Battery Voltage |
7.4V - 7.7V
High Voltage Lithium Battery |
| Storage Type |
External TF Card, Supports 8GB - 512GB
Class 10 and Above, U3 is Recommended |
| Type-C Port |
Type-C USB 5V
Connection to Computer USB Mode
Connection to PCCAM (Camera) Mode |
| LED Indicator Type |
Three Color Light (Red, Green, Blue) |
| 2 Control Button Type |
Power Button (A), OK Button (B) |
| Power Supply |
Supports 3 Power Supply Methods At The Same Time
(1) 5V USB to Type-C Port Power Supply
(2) 9V-24V WiFi Board or Network Port board Power Supply
(3) 6.8V-8.4V Battery Power Supply
(The 3-Axis Gimbal Version Does Not Support 5V USB) |
| Operating Temperature |
-10°C to +60°C Without Housing |
| Storage Temperature |
-20°C to +80°C |
| Humidity |
20% to 80% |
| PCB Dimensions |
38 x 38 mm |
| PCB Screw Hole Spacing |
External (34mm x4), Internal (28mm x2) |
| PCB Screw Hole Diameter |
2 mm |
| Optional Camera Configuration |
(1) KLT-G1M9 V6.2 + Camera
(2) KLT-G1M9 V6.2 + Camera + KLT-G1WF V6.3 WiFi Board
(3) KLT-G1M9 V6.2 + Camera + KLT-G1NK V6.3 Ethernet Board |
| Supportive Image Sensors |
13MP: IMX258
12MP: IMX377 OS12D40 IMX577 IMX386 IMX378
8MP: IM317
5MP: IMX335
2MP: IMX290 IMX385 |
| Optional Extension Ports |
WiFi, Ethernet Network Port, Display, Audio IC,
Lens Module, UART, I2C, SPI, PWM, MIC, etc. |
WiFi expansion board is equipped with the AW CM256SM single-pass dual-band WiFi module, which supports the use of single-band 2.4GHz or 5GHz wireless WiFi functions. The board supports WiFi antenna, reserved WiFi button (Button C), serial port (UART3), etc.
PWM, ADC button, touch screen and other expansion interfaces included. The board PCB size is 38x38mm, and it must be used with our company's designated master board. This WiFi board can not work independently.
| Hardware Specifications |
|
| Model No. |
KLT-G1WF V6.3 |
| WiFi Module |
AW CM256SM |
| Power Supply |
Supports 3 Power Supply Methods At The Same Time
(1) 5V USB to Type-C Port Power Supply
(2) 9V-24V WiFi Board Power Supply
(3) 6.8V-8.4V Battery Power Supply
(The 3-Axis Gimbal Version Does Not Support 5V USB) |
| WiFi Frequency Bands |
2.4GHz or 5GHz (Dual Band Single Channel) |
| Wireless Network Standards |
IEEE 802.11B/G/N/AC, WiFi Compliant |
| 2.4GHz Frequency Range |
2.400GHz - 2.472GHz (2.4GHz ISM Band) |
| 2.4GHz Channels |
2.4GHz: Channel 1 - Channel 13 |
| 2.4GHz Transmission Rate |
2 - 3 Megabytes |
| 2.4GHz Transmission Distance |
50 Meters (No Disruption) |
| 5GHz Frequency Range |
5.150GHz - 5.825GHz (5GHz ISM Band) |
| 5GHz Channels |
5GHz: Channel 1 - Channel 13 |
| 5GHz Transmission Rate |
6 - 8 Megabytes |
| 5GHz Transmission Distance |
30 Meters (No Disruption) |
| CVBS（TV-Out） |
720 x 576 |
| CVBS Standards |
NTSC / PAL (TV-Out) |
| Serial Port / UART |
RX3, TX3, GND |
| ADC Button |
Up, Down, Left, Right, OK 5-Way ADC Buttons
Power Button |
| Operating Temperature |
-10°C to +60°C Without Housing |
| Storage Temperature |
-20°C to +80°C |
| Humidity |
20% to 80% |
| PCB Dimensions |
38 x 38 mm |
| PCB Screw Hole Spacing |
34 mm |
| PCB Screw Hole Diameter |
2 mm |
| Extendable Functions |
PWM, ADC Buttons, WiFi Board Power Supply
UART3 Serial Port, Touch Screen, Other Interfaces |
The KLT-CMAOIS-IMX258 V1.0 optical image stabilization (OIS) camera module uses the Sony IMX258 (1/3.06 inch) image sensor, with a color square pixel display and up to 13 megapixels with 1.12um pixel size. When used with the master board, it can support shooting 13MP still pictures, and support up to 4K@60FPS (differential), 4K@30FPS video shooting. The world's smallest optical image stabilization module can correct slight jitter within 4 degrees.
It uses an extremely fine coaxial cable to connect to the mainboard, which is convenient for various installation scenarios. Supports optical image stabilization image enhancement function. The board frame size is 17*17mm.
This camera module is not sold separately. The camera module is solely compatible our company’s Ai Master board as they must be sold in bundle, optionally with WiFi expansion board or Network Ethernet board.
| Specifications |
|
| Model No. |
KLT-CMAOIS-IMX258 V1.0 |
| Image Sensor |
IMX258 |
| Image Sensor Type |
CMOS |
| Effective Pixels |
13 Megapixels |
| Sensor Size |
1/3.06" |
| Pixel Size |
1.12 um x 1.12 um |
| Gimbal Image Stabilization |
OIS - Optical Image Stabilizer |
| OIS Anti-Shake Control |
Turn ON, Turn OFF |
| Video Frame Rate |
4K@24/25/30/FPS, 4K@48/50/60FPS (Differential)
2.7K@24/25/30/48/50/60FPS
1080P@24/25/30/48/50/60/120FPS
720P@24/25/30/48/50/60/120/240FPS |
| Video Slow Motion |
OFF, 4K2X, 1080P4X, 720P8X |
Photo Resolution
(with Master Board) |
20MP (5200x3900) (Differential)
13MP (4160x3120)
12MP (4000x3000)
10MP (3648x2736)
8MP (3264x2448)
5MP (2592x1944)
3MP (2048x1536)
2MP (1920x1080) |
| Operating Temperature |
-10°C to +60°C |
| Storage Temperature |
-20°C to +80°C |
| Humidity |
20% to 80% |
| PCB Dimensions |
33 x 32 mm |
| Module Size |
33 x 32 x 14 mm |
| PCB Screw Hole Spacing |
13 x 13 mm |
| PCB Screw Hole Diameter |
2 mm |
|